Hole Table

Hole Table, which was previously an add-in in previous Mastercam releases, is now integrated with Mastercam and has been improved. Select Hole Table on the Drafting tab to use this new function.

An image showing the new Hole Table function panel.

Hole Table creates parameter notes for all holes (circles) in your part file, allowing you to gather hole data and record it in a table for part inspection. In previous Mastercam releases, it was limited to finding hole geometry only on the active plane and only recognized wireframe geometry.

An example of a solid with holes and the produced Hole Table.


As an add-in, Hole Table automatically recognized wireframe hole geometry. Now, Hole Table requires you to select geometry, but the type of geometry you can select has expanded to include wireframe, faces, edges, and bodies. You can filter your selection to any combination of these types, as well as individually remove a selection. Additionally, you can control the direction of each selected hole.

Display and Position

You can define the scope, size, and position of the table and labels describing the hole geometry. You can describe the holes in radii or diameters. You can also add location coordinates (in 2D and 3D) for each hole relative to the origin/world Cplane, Tplane, and WCS.

On the Advanced tab, you can show or hide the hole table and direction arrows in the graphics window.


You can create a report directly from Hole Table by selecting Create under the Active Reports group.

Copyright 2019 by CNC Software, Inc. All Rights Reserved. | Terms of Use | Privacy Statement